ALMiG Controls

ALMiG Air Control I

The ALMiG PLANT CONTROL series is a supervision system that was developed and manufactured to ensure reliable operation and low-cost preventative maintenance of your compressor system throughout the USA. The PLANT CONTROL is a system designed to include real-time status of compressors while providing on-site supervision centers. These can be located in your maintenance department with the option of peripherals at the plant level or your ALMiG service partner. The ALMiG PLANT CONTROL is available in two versions: PLANT CONTROL V and PLANT CONTROL T.

PLANT CONTROL V

ALMiG Plant Control V is an interactive system for visualizing, monitoring and controlling plant-wide compressed air systems. The software is a client/server based solution that provides data acquisition and supervisory control over compressors and all air system accessories. A fantastic feature of the ALMiG PLANT CONTROL V series is that the supervisory controls and visualizations can be viewed simultaneously by multiple users through the use of a regular web browser. With PLANT CONTROL V, this is limited to your local area network whereas the PLANT CONTROL T allows this to take place across the internet!

System requirements

  • PC with Win 2000/XP/Vista/7
  • At least Pentium 800 MHZ
  • 512 MB RAM
  • Approx. 20 GB of hard disk space
  • 8-speed CD-ROM drive or USB

plant-control-v-controls-almig plant-control-v-controls-almig
plant-control-v-controls-almig plant-control-v-controls-almig

plant-control-v-controls-almig

PLANT CONTROL T

ALMiG PLANT CONTROL T is an interactive suite of managed services for visualizing, monitoring and controlling plant-wide compressed air systems completely off-site. ALMiG PLANT CONTROL T managed services and remote monitoring services provide a professional maintenance staff's expertise to help you manage the air system health and monitor for failures. The unique feature about the PLANT CONTROL T is that managing and monitoring your system can take place off-site. This allows for a service team to reliably maintain your system and dedicate themselves to 100% up time. You can prevent expensive downtimes if you can act before something happens. This system is a truly proactive approach to maintaining the healthy status of your very important and vital compressor system.

System requirements

  • PC with Win 2000/XP/Vista/7
  • At least Pentium 800 MHZ
  • 512 MB RAM
  • Approx. 20 GB of hard disk space
  • 8-speed CD-ROM drive or USB

Features

  • Monitor up to 10 components such as dryers, filtration, condensate management and receivers
  • Service center receives relevant information regardless of location
  • Service center can supervise your station, change and adjust its operation as well as record and analyze the whole process
  • Status updates sent to cell phones or email
  • Remote troubleshooting

plant-control-t-controls-almig plant-control-t-controls-almig

plant-control-t-controls-almig